A different decision from the residential one
This guide is for the commercial buyer, and the decision is different from the homeowner’s. A business roof is a working surface: HVAC technicians walk it, penetrations multiply with every unit and vent, and the roof has to keep operating while the business below keeps trading. The residential question — which membrane suits a garage or addition — is covered in our companion guide, best roofing materials for Duncanville homes with flat roofs. Here the questions are foot traffic, penetrations, maintenance and total cost over the roof’s life.
Foot traffic and penetrations
Foot traffic. Every service visit is a puncture risk. TPO and EPDM both puncture; the difference is what happens next. TPO’s welded seams stay strong, but a puncture in the field still needs a welded patch. EPDM patches with tape or adhesive and is forgiving to repair, but its seams are the weak point over time. If your roof sees regular traffic, walkway pads and a traffic plan matter more than the membrane brand — and no membrane survives dropped tools and dragged equipment without protection.
Penetrations. A commercial roof is a field of curbs: HVAC units, vents, drains, pipes and skylights. Leaks on flat roofs happen at predictable places — ponding areas, open seams, membrane punctures and failed flashing around curbs and drains. Water rarely enters directly above the interior stain; it travels along the deck and insulation first. Whichever membrane you choose, the flashing details around every penetration are where the job is won or lost.
TPO vs EPDM Maintenance Contracts and Total Cost
Maintenance. A commercial flat roof needs a maintenance contract, not a one-off visit: drains cleared, seams checked, ponding monitored with the 48-hour test after storms, and flashing inspected at every curb. DFW commercial sources quote 20–30-year lifespans for single-ply membranes, but those assume maintenance. A neglected flat roof ages in half the time.
Cost. Third-party DFW ranges put TPO at $5–$13.80 and EPDM at $4.60–$11.50 per square foot installed, with modified bitumen at $4.61–$17.25. Those are planning ranges, not this business’s prices, and commercial scope — insulation, tapered systems for drainage, curb work — moves the total more than the membrane price per foot. A quote that does not itemise drainage and insulation is not comparable with one that does. See our commercial roofing and flat roofing pages, and our roof maintenance page for what a maintenance visit covers.
Heat and hail. TPO’s white surface reflects Texas heat, which matters on a large low-slope roof under a July sun. EPDM’s black surface absorbs it. On hail, neither membrane is hail-proof: Duncanville has seen 4-inch hail 6 miles away and 3-inch hail a mile away. Impact resistance for low-slope systems is a separate standard, UL 2218A, and it is worth asking about rather than assuming. To arrange a commercial roof inspection, call (469) 898-7253.